CineRace20 Analog XM+ / R9M
Gary-flywoo
Last Update منذ عامين
Please check whether the configuration of the drone corresponds to the one below.
Incorrect configuration can render the drone unusable or even damaged.
If you are not sure. Please contact FLYWOO Technology's email
Flight Controller: GOKU GN 413 13A AIO V2.1
Firmware Target: FLYWOOF411
Firmware Version: 4.2.X
Receiver Type: Frsky-XM+ FCC / R9M
Serial RX: UART 1
Motor direction: Reversed
GYRO: MPU6000